Subject | Text |
| [quote:6c9d4d99df="ck-x"]I have a Vizio L32 with a bad power supply... I have checked some things so |
| As stated above, a contactor must be used on the voltage / frequency it is designed for. the coil o |
|
| I do actually have all the related boards/parts. One of my jobs is repairing printers/faxes/scanner |
| I've got a dead FSP212-3F01.
Can someone please tell me what the values are for RS8 and RS1? On m |
Re: Rotel Amplifier Problem | [quote:b2aec23f38="pauly"]My Rotel RA-940BX amplifier has stopped working and I would like to try an |
| Shrad have contacted me but I had missed his precedent e-mail.
He gives me news this night.
His PS |
| Vtech, Thanks for your reply. I can see a faint image when shining a flashlight at the screen. So, |
seaching for service manual Becker car radio | hey
I have a car radio model: becker BE6054
the main board is a BE-6046
de radio is working on |
lc37af1e | AMOI lc37af1e
I AM LOOKING FOR SCHEMATIC!!! PLS HELP. I HAVE A POWER SUPPLY ISSUE. (NO |
| This is not a stepper motor, it is an ordinary DC motor.
I found some data on a russian website.
I |
hitachi convergence | If you mean the return resistors next to the stk's, no. They are all good and look brand new. I'm th |
| [quote:db50ba31d7="jryduke"]Alain28, Thanks for your reply. I am registered and I had already seen y |
STR-Z2156A, STR-Z2154 psu ic datasheets | Hello everyone,
I am looking for specifications for STR-Z2156A and STR-Z2154A but have only found |
Please help me reduce ripple and HF harmonics at 25-60 amps | Hi everyone,
Recently I acquired a broken down SOLA 1500 sinewave UPS which I was able to repair. |
Battery Operated Polygon Motor | Hello all, thanks for reading.
I have a kinda crazy experiment that im working on. I am trying t |
AS432EA8DN datasheet | [b:4da052cc91]Features[/b:4da052cc91]([url=http://www.chinaicmart.com/series-AS4/AS432EA8DN.html]AS4 |
mitsubishi vs-45609 | Minnie
I checked all the connectors and they where fine,So I ended up taking the main board out of |
|
Re: VS, N3235W blank screen | [quote:fb78631d38="train123"]Just to verify that video is present, shine a flashlight or bright ligh |
Anyone Recognise LC320EUD-SCA1 32" Full-HD 120Hz LED Pa | I've embarked on a project to build an HD picture monitor (not a TV - no audio circuits; no tuners) |
Service info viewsonic N3735W | When the tv is plugged in it goes from standby(red) to (blue).
All the buttons for power, volume, c |
| If an edge connector has a pin that's marked 12V and you're measuring 24V, I'd check that out 1st.
|
| I'm pretty sure it is normal for some of the heatsinks to be "hot" but I don't currently h |
N3235W viewsonic, need help please | minnie, what do i need to do to confirm the digital board is gone? any way for troubleshooting?
ye |
32PF9965 | Don't you love the term flyback, minnie? No problems with the name we give it. I refer to the transf |
Inv Bd | [quote:25f3daf869="jts1957"]Inverter board has 24V - Inverter board has 'enable' voltage = Can STILL |
Re: problem with Sanyo DP32746 | I bypassed the fuse temporarily with a GMA fuse of the same rating for test purposes. It blew as soo |
| Not sure if I undrestood, but in general, you should use whatever source the relay coil is rated fo |
Re: power supply board p/n | [quote:1284004ffc="beamik"]this board has a sticker on the bottom that reads:
B00102800105 D42 S0 |
I think | I put a jumper from the 5v to the on / off and send me ps 24v 12 and definitely think that the mothe |
Rotel Amplifier Problem | My Rotel RA-940BX amplifier has stopped working and I would like to try and fix it myself. Has anyon |